Settings on the Control Display BMW i3

Settings on the Control Display BMW i3



To start you must:

  1.  Switch ignition on
  2.  Go to menu and find "settings" ; press ok



Setting the language

To set the language on the Control Display:
  1.  "Settings"
  2. "Language/Units"
  3. "Language:"
  4. Select the desired language

Setting the time

  1. "Settings"
  2. "Time/Date"
  3. "Time:"
  4. Turn the controller until the desired hours are displayed.
  5. Press the controller.
  6. Turn the controller until the desired minutes are displayed.
  7.  Press the controller.
     The time is stored.

Setting the date

  1. "Settings"
  1. "Time/Date"
  2. "Date:"
  3. Turn the controller until the desired day is displayed.
  4. Press the controller.
  5. Make the necessary settings for the month and year.
    The date is stored.

Setting the united of measure

To set the units for fuel consumption, route/distance and temperature:
  1. "Settings"
  2. "Language/Units"
  3. Select the desired menu item.
  4. Select the desired unit.
    Settings are stored for the profile currently in use.

Setting the brightness

To set the brightness of the Control Display
  1. "Settings"
  2. "Control display"
  3. "Brightness"
  4. Turn the controller until the desired brightness is set.
  5. Press the controller.
    Settings are stored for the profile currently in use.


    • Related Articles

    • Plug and unplug the charging cable BMW i3

      To charge a BMW i3 you must: Open the flap by pressing gently on it, plug the cable, and then lock the car (The electric plug is at the back right of the car) To unplug the charging cable, you must: Unlock the vehicle to release the cable, unplug it ...

    • Cockpit BMW i3

    • Start & Drive BMW i3

      To start (No keys needed) 1. Press the break and press the START/STOP button; To drive 1. Pivot the handle to switch to ("D") drive or ("R") reverse; For D push once and for R pull twice To park the car 1. Break and press ("P") button when the car is ...

    • Tire pressure MINI COOPER SE

      How to reset the tire pressure 1. On the centre display select "Vehicle"; 2. Select the middle picture of the car to show up the settings list; 3. Select "Vehicle status"; 4. Select "Tire settings";;

    • Reset tires pressure Volkswagen Polo VI

      To reset the tires pressure from a Volkswagen Polo VI you just need to follow the next steps: Go to Vehicule on the display menu Chose the settings option Once you are in the vehicule settings just chose "tyres" Set tyres settings Confirm the ...