Start MINI COOPER SE

How to start 

1. Break  ;

2. Press down the middle colored button;

3. Select the ("D") mode with the gear selection lever

• Related Articles

• Tire pressure MINI COOPER SE

  How to reset the tire pressure 1. On the centre display select "Vehicle"; 2. Select the middle picture of the car to show up the settings list; 3. Select "Vehicle status"; 4. Select "Tire settings";;

• Plug and unplug the charging cable Mini COOPER SE

  How to charge Unlock your car before charging the car 1. Push the charge door; 2. Take out the vehicle's charging cable; 3. Remove the charging handle's protective cover; 4. Plug the cable in the charging socket ; 5. Select wich charging point (1 or ...

• How to start the Polestar 2

  The Polestar doesn't have a traditional start button wich leaves sometimes the driver confused. The car is equiped with an integrated sensor in the driver's seat that makes it different to get started. How to start the vehicle 1. Put on the seatbelt; ...

• The car is open but the engine doesn't start

  If you have managed to open the car but after a few moments the engine does not start, do not stress, this is the security system of the vehicle that cuts off the start if the engine is not started in the minutes following the opening of the car. To ...

• Start & Drive Volkswagen ID.3

  This car model has no start and stop button. It could be difficult to find it when you don't know the car. How to start 1. Put on the seatbelt and press the break , the car indicates you it is ready to start; 2. Select the ("D") Drive mode by turning ...