How to start the Polestar 2

The Polestar doesn't have a traditional start button wich leaves sometimes the driver confused. The car is equiped with an integrated sensor in the driver's seat that makes it different to get started.

How to start the vehicle 

1. Put on the seatbelt;

2. Press the break pedal ;

3. Select the drive mode: ("D") Drive or ("R") Reverse mode;

4. Realease the break pedal  ;

• Related Articles

• Tire pressure Polestar 2

  How to do the tire reset 1. Start the vehicle 2. On centre display click on ; 3. Click on "More"; 4. Select "Car status"; 5. Select "Store pressure" and then "Confirm";

• Start MINI COOPER SE

  How to start 1. Break ; 2. Press down the middle colored button; 3. Select the ("D") mode with the gear selection lever

• The car is open but the engine doesn't start

  If you have managed to open the car but after a few moments the engine does not start, do not stress, this is the security system of the vehicle that cuts off the start if the engine is not started in the minutes following the opening of the car. To ...

• Start & Drive Volkswagen ID.3

  This car model has no start and stop button. It could be difficult to find it when you don't know the car. How to start 1. Put on the seatbelt and press the break , the car indicates you it is ready to start; 2. Select the ("D") Drive mode by turning ...

• Start & Drive Volkswagen ID.5

  This car model has no start and stop button. It could be difficult to find it when you don't know the car. How to start 1. Put on the seatbelt and press the break , the car indicates you it is ready to start; 2. Select the ("D") Drive mode by turning ...